Inspired by hand-held carbide lamps used by miners in the early twentieth century, Naica bounces light around the void to emit a soft flush of light from one long face.

The lamp's gently curving corners create a softened profile, which the designers say alludes to the form of a cavern, and the name Naica refers to a working mine located in Mexico.

A fabric-covered cable loops up through the top of the lamp to form a handle.

The product is available in white with either a red or white cavity.

Something was founded by designers Daniel Debiasi and Federico Sandri.

Similar lamps on Dezeen include one held together with a silicone band by Benjamin Hubert, also for Ligne Roset, and another by Luca Nichetto, called Vader after the Star Wars character whose mask it resembles. See more stories about lamp design »

Other recent launches from Ligne Roset include a glass table with three tops, an asymmetric desk and a chair inspired by spaghetti. See all our stories about Ligne Roset »

The post Naica ceramic lamp by Something
for Ligne Roset appeared first on Dezeen.

Designed for Ligne Roset, 360 degrés has a second shelf tucked underneath the larger table top, which can be rotated outward and positioned on three sides next to the slightly higher surface to create more flat space.

The additional shelf is balanced on an arm that branches from the single leg supporting the primary table.

Paoli chamfered the coffee table corners and minimised the profiles by tapering the edges underneath.

The most recent Ligne Roset products on Dezeen are a table with a cross-shaped notch to store magazines and a console that can be curled round to create a dining table.

Tables we've featured in the past couple of weeks include Zaha Hadid's limited editions made of marble and some that Nendo coloured using crayons.

See all our stories about table design »
See all our stories about designs for Ligne Roset »

The post 360 degrés by Roberto Paoli
for Ligne Roset appeared first on Dezeen.

Designed by Philippe Nigro for Ligne Roset, the Cuts table is made from moulded polyurethane and reinforced with a steel frame.

Deep folds disrupt the lacquered white surface to create four tabletops at three different heights.

Two years ago in Cologne, Nigro presented interlocking pendant lights and a set of bright yellow divans, tables and a foot stool, both for Ligne Roset – see all designs by Philippe Nigro.

Other Ligne Roset products shown in Cologne this year include a chair inspired by cooked spaghetti and an asymmetric desk with a bright yellow top – see all design from Cologne 2013.

See all tables »
See all Ligne Roset »

Here's some more information from the designers:

Philippe Nigro loves to explore concepts in depth. For years now he has been working with Ligne Roset on the theme of intersections, interweavings and assemblies. He brilliantly demonstrated this with his Confluences settee (2009), and then his indoor/outdoor collections Passio and Résille (2011). In 2010, he blazed a new trail whilst playing with the concept of notches, resulting in the Inséparable footstool/table (2010), a concept which was later masterfully transformed into the Cuts shelving (2011).

In 2013, he develops that same idea of the notch, this time applying it to the low table: a flat surface is ‘disrupted’ by notches to create 4 distinct tops positioned at three different heights. The angulation of the two intersecting notches is 28°.

The irregular architecture of the low table thus obtained contrasts with the slimness (just 8 mm) of the single material and its immaculate whiteness to create a result which is more than appealing: the varying dimensions and differing levels of the tops are practical whilst the notches can be used as magazine storage.

Whichever of its each four sides it is viewed from, its contours are different yet always surprisingly light, like a paper aeroplane.

Low table in 8 mm thick satin white lacquered expanded moulded polyurethane, reinforced with a steel framework.

Width: 100
Depth: 100
Height: 15/23/30

The post Cuts by Philippe Nigro
for Ligne Roset appeared first on Dezeen.

Philippine Lemaire incorporated metal ball joints underneath each sawn-oak circular top so the sections can be realigned.

Segments cut out of three of the four tops allow them to fit together and rotate around each other easily.

Each suface balances on two solid oak legs, which branch from a single stem coated in grey laquer at the joint.

The console was displayed at imm cologne last month, where a paperclip-like lamp and an asymmetric desk were also on show.

Other products launched by Ligne Roset this year include a footstool nipped-in with lengths of cord and a glass table with three circular tops.

See more products from Ligne Roset »
See all our stories about table design »
See all our coverage of Cologne 2013 »

The post Itisy table by Philippine Lemaire
for Ligne Roset appeared first on Dezeen.

Called Lace, the foam upholstery has a cord wrapped around it horizontally two further cords that wrap underneath and puncture the sides. The cords come in ecru or black and the cover is removable.

Lace was presented at Maison&Objet in Paris last month, where other releases from Ligne Roset included an asymmetric desk and chair inspired by spaghetti.

Benjamin Graindorge also presented a series of vases with hoods for Paris firm Moustache at the fair and we've previously featured his design for a garden that floats on the surface of a fishtank and uses fish waste as fertiliser.

See more products from Ligne Roset »
See more design by Benjamin Graindorge »
See more launches at Maison&Objet »

The post Lace by Benjamin Graindorge
for Ligne Roset appeared first on Dezeen.