Dezeen Magazine

Silhouette of a person standing in front of a mono-pitched polycarbonate shed on a wooden deck shining light through timber slats on a slope in the New Zealand bush

Fabric creates timber and polycarbonate shed to double as light sculpture

Timber slats that mimic the surrounding treeline wrap around a shed in Akaroa, New Zealand, which was designed by architecture studio Fabric to transform into a light sculpture at night.

Named Nightlight, the 10-square-metre shed is located in a clearing among kānuka trees and is part of a plan to transform the site into a home.

Shed covered in timber slats raised on concrete pilotis on a slope in the New Zealand bush
Timber planks on the exterior were designed to blend into the surrounding trees

The owners wanted a shed that would provide storage and services for the future house while also creating a glowing structure that can be enjoyed from outdoor lounge spaces.

The shed has a translucent, mono-pitched form made from polycarbonate, which is raised from the sloping ground on concrete piles.

Mono-pitched polycarbonate shed on a wooden deck shining light through timber slats on a slope in the New Zealand bush
The structure doubles as a light sculpture

Light from inside the shed radiates through gaps between timber slats that wrap around the exterior.

"Rather than locating this building out of sight like a typical shed or using it only for its services, Nightlight has been reimagined as a light sculpture that will proudly be seen from the future outdoor living space," said Fabric.

"The filtered light seen glowing between the slats at night is a contrasting aesthetic to the minimalist facade seen throughout the day."

Polycarbonate mono-pitched shed covered in timber battens on a wood decking with an external sink
The shed has a 10-square-metre footprint

Nightlight was designed to be used as a small bathroom, workspace, outdoor kitchen and storage area. It has a toilet and workbench inside the structure and an external shower and sink.

According to Fabric, laminated veneer lumber (LVL) pine was used for the timber slats for its stiffness and straightness, meaning fewer timber members were needed for the shed's construction.

"All battens and slats were carefully lined up with the internal structure and used sparingly to allow a uniform pattern of glow at night," said Fabric.

"This critical geometry and alignment was a constant challenge throughout the build."

Interior of a timber and polycarbonate shed with a wood workbench, green floor, metal stool and storage
The interior of the shed features warm-toned timber and muted green colours

The external pine planks and locally sourced macrocarpa wood used for the outdoor decking were silvered to mimic the surrounding kānuka tree trunks.

The timber frame inside the shed has a warmer tone to create a welcoming and inviting space.

Two people and a dog on the decking of a mono-pitched shed covered in timber battens in a New Zealand bush
Nightlight is raised from the ground on concrete piles

Fixings and joins between materials were left exposed, and muted green accents were added to the structure to further blend in with the landscape.

Fabric recently completed a vacation cabin in a coastal village in New Zealand, with large windows framing views of the surrounding rainforest trees.

The photography is by Nancy Zhou.

More images

Floor plan of the Nightlight shed by Fabric
Site plan of the Nightlight shed by Fabric
Top of a mono-pitched polycarbonate shed covered in timber battens in the New Zealand bush
A person sitting on a green metal stool at a timber workbench, with green storage on wheels and green floor
Close-up of shed storage with screws and equipment
Interior of a polycarbonate shed with a mono-pitched roof and timber structure
Timber structure with polycarbonate walls and external timber battens
Top of a mono-pitched polycarbonate shed covered in timber battens
Top of a mono-pitched polycarbonate shed covered with a timber structure